Jigs and fixtures
Selective Pallet Racking Warehouse Model
- Bounding box
- 193.8 × 124 × 85.6 mm
- Engine
- 3D Printing B-rep
- Parameters
- 18
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Design the racking system according to the drawing details and specific dimensions shown in this image, and simulate the forklift's operation within the movement zone during the lifting, lowering, and material handling processes
Parameters
| Name | Value | Range |
|---|---|---|
| Model scale (0.02 = 1:50) | 0.02 mm | 0.01 – 0.05 |
| Aisle / movement zone width | 2800 mm | 1800 – 4000 |
| Bays per rack row | 3 mm | 1 – 6 |
| Bay length, post to post | 2800 mm | 2000 – 3600 |
| Rack depth | 1100 mm | 800 – 1500 |
| Upright post section | 90 mm | 60 – 150 |
| Upright frame height | 4200 mm | 2000 – 6000 |
| Beam section height | 120 mm | 80 – 200 |
| Beam section width | 60 mm | 40 – 100 |
| First beam level | 1200 mm | 200 – 2500 |
| Beam level spacing | 1200 mm | 600 – 2000 |
| Number of beam levels | 3 mm | 1 – 5 |
| Pallet length | 1200 mm | 800 – 1400 |
| Pallet width | 1000 mm | 600 – 1200 |
| Pallet height | 150 mm | 100 – 250 |
| Pallets per bay and level | 2 mm | 1 – 2 |
| Fork carriage height | 600 mm | 100 – 2400 |
| Forklift position along aisle | 2400 mm | -4000 – 4000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
