Sculptural Wave Vanity Organizer

Refine the current model without changing the internal compartment sizes. Keep: * exactly 3 compartments * current internal widths * current internal depths * current internal heights * one connected body * closed bottoms * stable flat base Do NOT change the functional compartment dimensions. The current model looks too rectangular and box-like. Change ONLY the exterior silhouette and top transitions so the organizer closely matches the attached reference image. Required exterior styling: * create one smooth continuous wave across the entire top edge * highest on the left compartment * gently curve downward through the middle compartment * finish at the lowest point on the right compartment * use large-radius organic curves, not straight diagonal cuts * eliminate the stepped rectangular appearance * remove sharp vertical transitions between compartments * smoothly blend the three compartment walls together Front appearance: * front wall should have a soft flowing curved profile * do not use three separate rectangular front faces * the front should read visually as one sculptural object Side appearance: * side walls should transition smoothly between the three heights * use rounded flowing surfaces inspired by the reference image * no boxy protrusions Corners: * use generous fillets on all visible external edges * target outer corner radius approximately 8–12 mm * soften vertical edges and top rims Top openings: * keep each compartment opening fully usable * preserve the current interior volumes * allow the top rim to follow the wave shape Base: * keep the bottom flat and stable * remove the visible protruding rectangular base flange if it is not structurally required * the outer walls should flow naturally into the base like the reference image Material: * preserve thin hollow walls * do not add solid mass just to create the curves * maintain approximately 2.4 mm walls * preserve low filament usage Visual goal: The final object should look like a sculptural ceramic vanity organizer, not three fused storage boxes. Match the attached reference image as closely as possible while preserving all current internal compartment dimensions. Do not add decoration, texture, handles, text, or extra features.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.