Mechanical parts
Sculpted 7-inch Column Shelf Bracket – Strap Saddle
- Bounding box
- 62 × 157.6 × 117.9 mm
- Engine
- 3D Printing B-rep
- Parameters
- 9
- Published
- November 9, 2026
Download
Free to download and use. See the terms.
The prompt
Structural-concept FDM shelf support for 7-inch radial segments, 57-inch column circumference, 0.98-inch shelf rear channel. Curved back with saddle for single encircling ratchet band, long 6.14-inch arm and twin tapered gussets beneath. Prototype not load-rated.
Parameters
| Name | Value | Range |
|---|---|---|
| Column circumference | 1447.8 mm | 1300 – 1700 |
| Radius fit clearance | 0.6 mm | 0 – 2 |
| Shelf support reach | 156 mm | 125 – 180 |
| Bracket width | 62 mm | 50 – 85 |
| Horizontal support thickness | 14 mm | 11 – 20 |
| Curved backing thickness | 13 mm | 10 – 20 |
| Each reinforced side web width | 11 mm | 8 – 16 |
| Existing 0.98-inch rear recess | 24.89 mm | 20 – 30 |
| Flat belt saddle relief | 1.2 mm | 0.5 – 2.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.