Brackets and mounts
SAE Baja Inverted Brake Pedal
- Bounding box
- 33.4 × 76.0 × 228.6 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
brake pedal for an SAE baja car. I want it to be be 9 inches long with a hole for a pivot point 2.25 inches from the top. This pedal will be mounted in an inverted pedal setup
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length | 228.6 mm | 100 – 400 |
| Pivot Hole From Top | 57.15 mm | 20 – 150 |
| Lever Arm Width | 30 mm | 15 – 60 |
| Lever Arm Thickness | 6.35 mm | 3 – 20 |
| Pivot Bore Dia | 12.7 mm | 5 – 25 |
| Pivot Boss Dia | 28 mm | 16 – 45 |
| Pivot Boss Width | 14 mm | 6.5 – 30 |
| MC Clevis Bore Dia | 8 mm | 4 – 16 |
| Clevis Bore Below Pivot | 31.75 mm | 15 – 80 |
| Clevis Boss Dia | 20 mm | 10 – 35 |
| Clevis Boss Width | 10 mm | 6.5 – 25 |
| Upper Section Bore Dia | 8 mm | 3 – 14 |
| Upper Bore Above Pivot | 38 mm | 20 – 45 |
| Foot Pad Width | 76 mm | 40 – 120 |
| Foot Pad Height | 95 mm | 40 – 150 |
| Foot Pad Thickness | 6.35 mm | 3 – 16 |
| Grip Hole Dia | 6 mm | 2 – 12 |
| Grip Hole Count | 6 mm | 0 – 12 |
| Arm Corner Radius | 8 mm | 0 – 12 |
| Pad Corner Radius | 10 mm | 0 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and