Mechanical parts
Rotating Latch Mechanism
- Bounding box
- 30.3 × 20 × 14.8 mm
- Engine
- 3D Printing B-rep
- Parameters
- 7
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
Create a rotating latch mechanism. Part A (Shaft): A square prism with dimensions 9.5mm x 9.5mm x 8mm length. Part B (Hook): A rectangular block attached to the bottom end of the square shaft. Dimensions: length 25mm, width 10mm, thickness 5mm. It should be offset to one side (creating an L-shape). Part C (Handle): A small flat tab or cylinder on the top end of the shaft for turning it with fingers. Dimensions: 20mm diameter, 3mm thickness.
Parameters
| Name | Value | Range |
|---|---|---|
| Shaft square cross-section | 9.5 mm | 5 – 20 |
| Shaft length | 8 mm | 4 – 30 |
| Hook length | 25 mm | 10 – 60 |
| Hook width | 10 mm | 5 – 30 |
| Hook thickness | 5 mm | 2 – 12 |
| Handle diameter | 20 mm | 10 – 50 |
| Handle thickness | 3 mm | 1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.