Brackets and mounts
Rotary Abrasive-Belt Plate with 6 Idler Bearings
- Bounding box
- 508.2 × 508.0 × 220.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- November 12, 2026
Download
Free to download and use. See the terms.
The prompt
Following are the parts on which this machine consists: 1- A round iron plate= 10 mm thick, 20 inches round. 2- 6 wallmount bearings. Details: Six wall mount bearings are on upper side of plate in triangle form and then lower side of plate in triangle form. All of the bearings has round disc to run abrasive belt on it.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Diameter | 508 mm | 200 – 1200 |
| Plate Thickness | 10 mm | 4 – 50 |
| Centre Bore | 40 mm | 12 – 200 |
| Bolt Ring Radius | 190 mm | 80 – 200 |
| Flange Length | 80 mm | 40 – 160 |
| Flange Width | 60 mm | 30 – 120 |
| Flange Thickness | 10 mm | 4 – 30 |
| Fork Cheek Length | 40 mm | 20 – 70 |
| Fork Cheek Thickness | 12 mm | 5 – 30 |
| Disc-to-Cheek Gap | 2 mm | 0.5 – 10 |
| Housing Height | 72 mm | 40 – 160 |
| Idler Disc Diameter | 100 mm | 40 – 200 |
| Idler Disc Thickness | 20 mm | 6 – 60 |
| Idler Shaft Diameter | 24 mm | 8 – 60 |
| Disc Ground Clearance | 5 mm | 1 – 30 |
| Mounting Bolt Hole | 9 mm | 3 – 20 |
| Bolt Edge Margin | 12 mm | 4 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and