Mechanical parts
Robotic Gripper Arm Mounting Base
- Bounding box
- 60.0 × 60.0 × 70.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- September 28, 2026
Download
Free to download and use. See the terms.
The prompt
Generate arm
Parameters
| Name | Value | Range |
|---|---|---|
| Mounting Flange Diameter | 60 mm | 30 – 110 |
| Flange Thickness | 6 mm | 3 – 16 |
| Bolt Circle Diameter | 45 mm | 20 – 90 |
| Bolt Hole Diameter | 4.5 mm | 2 – 10 |
| Bolt Hole Count | 4 count | 2 – 12 |
| Neck Diameter | 30 mm | 15 – 60 |
| Neck Height | 12 mm | 4 – 40 |
| Body Width (X) | 50 mm | 25 – 90 |
| Body Depth (Y) | 34 mm | 20 – 80 |
| Body Height | 26 mm | 10 – 60 |
| Central Cable Bore Dia | 10 mm | 2 – 24 |
| Body Corner Fillet Radius | 3 mm | 0.5 – 8 |
| Fork Prong Width | 40 mm | 12 – 80 |
| Fork Prong Thickness | 8 mm | 3 – 20 |
| Fork Gap Between Prongs | 18 mm | 6 – 50 |
| Fork Prong Height | 26 mm | 10 – 60 |
| Finger Pivot Pin Hole Dia | 5 mm | 2 – 14 |
| Pivot Hole Height Above Prong Base | 12 mm | 4 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.