Mechanical parts
Robot Arm
- Bounding box
- 150.6 × 70 × 106.9 mm
- Engine
- 3D Printing B-rep
- Parameters
- 18
- Published
- October 28, 2026
Download
Free to download and use. See the terms.
The prompt
robotic arm
Parameters
| Name | Value | Range |
|---|---|---|
| Base diameter | 70 mm | 40 – 120 |
| Base height | 10 mm | 6 – 20 |
| Turret diameter | 40 mm | 24 – 80 |
| Turret height above base | 22 mm | 10 – 60 |
| Lower arm length | 58 mm | 30 – 120 |
| Upper arm length | 48 mm | 30 – 120 |
| Shoulder tilt from vertical | 25 deg | 0 – 80 |
| Elbow bend | 60 deg | 0 – 120 |
| Arm thickness | 10 mm | 6 – 20 |
| Shoulder / elbow joint diameter | 20 mm | 12 – 30 |
| Wrist joint diameter | 16 mm | 10 – 26 |
| Palm width | 24 mm | 14 – 50 |
| Palm length | 14 mm | 8 – 30 |
| Finger length | 20 mm | 10 – 50 |
| Finger gap | 12 mm | 4 – 40 |
| Finger thickness | 4 mm | 2 – 8 |
| Sliding clearance | 0.25 mm | 0.1 – 0.5 |
| Part overlap | 0.6 mm | 0.2 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.