Jigs and fixtures
Road Bike Frame (No Wheels)
- Bounding box
- 400 × 1046.6 × 782.7 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- November 21, 2026
Download
Free to download and use. See the terms.
The prompt
A standard racing bike without the wheels and suspension
Parameters
| Name | Value | Range |
|---|---|---|
| Seat tube length | 520 mm | 400 – 620 |
| Seat tube angle | 73 deg | 68 – 76 |
| Head tube angle | 73.5 deg | 68 – 76 |
| Head tube length | 150 mm | 80 – 250 |
| Chainstay length | 410 mm | 380 – 460 |
| Bottom bracket height | 70 mm | 50 – 90 |
| BB to front axle | 580 mm | 540 – 640 |
| Axle-to-crown fork length | 370 mm | 330 – 420 |
| Main tube diameter | 34 mm | 22 – 48 |
| Rear stay diameter | 16 mm | 10 – 24 |
| Head tube outer diameter | 44 mm | 34 – 60 |
| Handlebar width | 400 mm | 340 – 460 |
| Exposed seat post | 190 mm | 80 – 280 |
| Crank arm length | 170 mm | 160 – 180 |
| Chainring radius | 70 mm | 55 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
