Mechanical parts
Riduttore 16:1 REV H - giunti esagonali rinforzati e supporti corretti
- Bounding box
- 112 × 112 × 71.3 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 12, 2026
Download
Free to download and use. See the terms.
The prompt
Versione H del riduttore PETG: ingresso esagono AF11 (femmina 11.4), uscita AF16 (femmina 16.4); diametri shaft Ø18 ingresso, Ø21 uscita, fori supporto/portasatelliti aggiornati. 20 geometrie per 33 pezzi. Include tolleranze parametriche. Prototipo ancora da collaudare.
Parameters
| Name | Value | Range |
|---|---|---|
| Diametro esterno mm | 112 mm | 108 – 120 |
| Modulo denti mm | 1.5 mm | 1.4 – 1.6 |
| Gioco tangenziale denti mm | 0.3 mm | 0.18 – 0.42 |
| Foro satellite mm | 6.4 mm | 6.2 – 6.7 |
| Diametro boccola PETG mm | 6 mm | 5.8 – 6.2 |
| Foro passante M3 mm | 3.4 mm | 3.2 – 3.6 |
| Diametro interno innesto mm | 87.9 mm | 87.7 – 88.3 |
| Gioco radiale per lato sui supporti mm | 0.3 mm | 0.2 – 0.5 |
| Gioco assiale per lato denti mm | 0.3 mm | 0.2 – 0.5 |
| Gioco tra facce esagoni mm | 0.4 mm | 0.2 – 0.6 |
| Esagono ingresso mm tra facce | 11 mm | 10 – 12 |
| Esagono uscita mm tra facce | 16 mm | 15 – 17 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.