Mechanical parts
Reservoir with C-Clip Roller Supports
- Bounding box
- 120.0 × 70.0 × 180.0 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Modify only the two existing Roller R1 shaft supports. Do not rebuild or modify the reservoir. Do not modify Roller R1 or the two existing slots. Convert each current upward-open U-shaped shaft seat into a C-shaped snap-fit seat. For both supports: - keep shaft center Y = 10.14 mm - keep shaft center Z = 14 mm - circular shaft seat diameter = 3.4 mm - extend support top to Z = 16 mm - keep support bottom at Z = 9.8 mm - keep support Y range = 5.9 to 14.4 mm Create a vertical opening from the top of each support to the circular seat. Opening: - width along Y = 2.6 mm - centered at Y = 10.14 mm - open upward The circular seat must retain a 3 mm shaft after it is pressed through the 2.6 mm opening. Keep: - left support X = 3 to 6 mm - right support X = 114 to 117 mm Do not create holes through the reservoir walls. Do not add the shaft. Do not merge Roller R1 with the supports. Do not add any other feature.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Width (X) | 120 mm | 60 – 300 |
| Overall Height (Z) | 180 mm | 80 – 400 |
| Back Depth at Z=0 | 20 mm | 5 – 80 |
| Back Depth at Mid Z | 22 mm | 5 – 100 |
| Back Depth at Top Z | 70 mm | 10 – 200 |
| Mid Level Z | 100 mm | 20 – 300 |
| Wall Thickness | 3 mm | 1 – 10 |
| Bottom Thickness | 4 mm | 1 – 15 |
| Slot Width (X) | 103 mm | 10 – 260 |
| Slot Height (Z) | 3.8 mm | 1 – 20 |
| Slot Center X | 60 mm | 0 – 300 |
| Lower Slot Center Z | 132 mm | 0 – 380 |
| Upper Slot Center Z | 148 mm | 0 – 380 |
| Left Support X Start | 3 mm | 0 – 150 |
| Right Support X Start | 114 mm | 0 – 300 |
| Support Thickness (X) | 3 mm | 1 – 15 |
| Support Y Front | 5.9 mm | -20 – 60 |
| Support Y Back | 14.4 mm | -20 – 80 |
| Support Z Bottom | 9.8 mm | -20 – 150 |
| Support Z Top | 16 mm | 0 – 180 |
| Shaft Axis Y | 10.14 mm | -20 – 60 |
| Shaft Axis Z | 14 mm | -20 – 150 |
| Seat Diameter | 3.4 mm | 0.5 – 20 |
| Snap Opening Width (Y) | 2.6 mm | 0.2 – 19 |
| Roller Center X | 60 mm | 0 – 300 |
| Roller Length (X) | 106 mm | 5 – 300 |
| Roller Diameter | 8 mm | 2 – 60 |
| Roller Bore Diameter | 3.4 mm | 0.5 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.