Mechanical parts
Reinforced Divert Arm
- Bounding box
- 208 × 90 × 116.5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 22
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
What always breaks down is that base body get fractured at corners where Weld is, improve the divert arm
Parameters
| Name | Value | Range |
|---|---|---|
| Base plate width | 90 mm | 40 – 200 |
| Base plate thickness | 8 mm | 4 – 20 |
| Plate corner radius | 12 mm | 3 – 30 |
| Mounting bolt hole diameter | 5.5 mm | 3 – 10 |
| Mounting bolt hole spacing | 64 mm | 30 – 160 |
| Pedestal diameter | 52 mm | 24 – 120 |
| Pedestal height above plate | 42 mm | 10 – 150 |
| Pedestal wall thickness | 6 mm | 2 – 20 |
| Root fillet radius | 14 mm | 3 – 40 |
| Gusset rib thickness | 6 mm | 3 – 12 |
| Gusset rib height | 24 mm | 8 – 80 |
| Gusset rib radial reach | 18 mm | 5 – 50 |
| Hub diameter | 54 mm | 24 – 110 |
| Hub height | 12 mm | 6 – 40 |
| Spigot diameter | 39.6 mm | 10 – 90 |
| Spigot insertion depth | 10 mm | 3 – 40 |
| Arm reach from pivot | 145 mm | 60 – 300 |
| Arm thickness | 12 mm | 6 – 30 |
| Arm tip width | 36 mm | 12 – 80 |
| Blade height above arm | 55 mm | 15 – 150 |
| Blade thickness | 8 mm | 3 – 20 |
| Blade root chamfer | 6 mm | 1 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.