Mechanical parts
Rear cap (part 5)
- Bounding box
- 53.8 × 53.8 × 26.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Smart acetabular reamer, part 5: rear end cap. 50 mm domed body, 53.8 mm spigot that plugs into the barrel with O-ring groove, internal pocket with NFC coil recess, engraved NFC tap mark on the rear face, power switch opening on top, two radial M3 screw holes. Origin at the rear-most point, +Z forward, +Y up.
Parameters
| Name | Value | Range |
|---|---|---|
| Body diameter | 50 mm | 40 – 54 |
| Body length | 20 mm | 12 – 30 |
| Rear dome fillet | 8 mm | 0 – 12 |
| Spigot diameter | 53.8 mm | 45 – 56 |
| Spigot length | 6 mm | 4 – 10 |
| Inner pocket diameter | 46 mm | 36 – 50 |
| Inner pocket depth | 18 mm | 10 – 24 |
| NFC coil recess diameter | 40 mm | 20 – 44 |
| Switch opening length | 12 mm | 8 – 16 |
| Switch opening width | 8 mm | 5 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.
