Mechanical parts
RC Rod End
- Bounding box
- 16.0 × 23.0 × 67.5 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
"Create a mechanical rod end for an RC suspension/steering system. It consists of a main cylindrical shaft and an angled head. The main shaft has an outer diameter of 14mm and a length of 46 mm. Cut a straight cylindrical hole into the bottom of this shaft along its center axis with a diameter of 4mm and a depth of 23 mm. Attach the angled head to the top of the main shaft, bending at an angle of 25 degrees. The angled head has an outer diameter of 16mm. Through the side of the angled head, create a spherical cavity with a diameter of 8mm. Add a 2mm fillet at the joint where the angled head meets the main shaft to increase structural strength."
Parameters
| Name | Value | Range |
|---|---|---|
| Shaft OD | 14 mm | 6 – 30 |
| Shaft Length | 46 mm | 20 – 100 |
| Shaft Hole Dia | 4 mm | 1 – 10 |
| Shaft Hole Depth | 23 mm | 5 – 46 |
| Head OD | 16 mm | 8 – 30 |
| Head Length | 20 mm | 10 – 50 |
| Head Tilt Angle | 25 deg | 0 – 90 |
| Spherical Cavity Dia | 8 mm | 3 – 15 |
| Cavity Side Offset | 6 mm | 4 – 14 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.