Mechanical parts
RC Inline-6 Marine Engine
- Bounding box
- 360 × 170.5 × 161 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
I want to build a miniature rc / hobby engine, i want it to be designed similar to a ship wertzilä engine, 6 cylinders, with the bottom part with hatches outside of each rod, the total size of the engine should be around 30cm in lenght and then the hight will be whatever it will be just so that it comes out in scale, so an rc size ship engine, with working internals, camshaft with bearings and crankshaft with bearings, and the mechanism to connect them both and in real life a ship engine is using a turbo, but im going to run this engine on petrol 95 oktan, so also design the head to have size 6 spark plugs, and it will also need inlet to add air intake, and exhaust manifold on the other side, so in short terms, design it to look like a ship engine but that can actully run om regular petrol, and also add a starter motor to the flywheel, and it all, make all holes for all bolts and nuts, im thinking this engine will use alot of m2-m3 screws / bolts
Parameters
| Name | Value | Range |
|---|---|---|
| Engine length | 300 mm | 240 – 360 |
| Block width | 95 mm | 70 – 130 |
| Block height | 110 mm | 80 – 150 |
| Cylinder head thickness | 28 mm | 15 – 45 |
| Cylinder bore | 19 mm | 16 – 22 |
| Bore spacing | 40 mm | 30 – 60 |
| Stroke | 20 mm | 12 – 40 |
| Rod centre distance | 38 mm | 25 – 60 |
| Main journal diameter | 12 mm | 8 – 20 |
| Flywheel diameter | 75 mm | 55 – 100 |
| Flywheel thickness | 10 mm | 5 – 18 |
| Spark-plug thread diameter | 10 mm | 8 – 12 |
| Bolt clearance hole | 3.4 mm | 3 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.
