Mechanical parts
RC Fishing Boat Propeller (LH / RH)
- Bounding box
- 20.7 × 23.9 × 9 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
Design a propeller for an RC fishing boat—available in both left-hand and right-hand versions—with an overall diameter of 26 mm and a 2.25 mm shaft bore, optimized for high speed.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall diameter | 26 mm | 15 – 60 |
| Shaft bore | 2.25 mm | 1.5 – 6 |
| Pitch - higher = faster | 30 mm | 10 – 80 |
| Number of blades | 3 mm | 2 – 5 |
| Handedness | 1 mm | 0 – -1 |
| Hub diameter | 5.5 mm | 3 – 12 |
| Hub length | 9 mm | 4 – 20 |
| Blade chord at root | 6 mm | 2 – 14 |
| Blade chord at tip | 2.8 mm | 1 – 10 |
| Blade thickness at root | 1.2 mm | 0.6 – 3 |
| Blade thickness at tip | 0.7 mm | 0.4 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.