Mechanical parts
RC Control Arm Pivot Clamp Brace
- Bounding box
- 20.0 × 40.0 × 14.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- October 10, 2026
Download
Free to download and use. See the terms.
The prompt
ok so im using the proto 36 rc car chassis. im using the upgraded lower control arm package the created as well as custom upgrades like adjustable rear wheel toe and aluminum upper tie rod control arms. these upgrades did help but handling is still sub par where it gust wants to spin out. Generate me an new connection point i can screw onto the chassis that decreases the play in the control arms as the play due to the 3dprint wears and causes play. this new connection must be able to be connected to all of the 4 control arms but the rear must take into account that more wide tires will be used to improve handling and will not increase with as the tire will store that tire inward. make this model 3d printable as well
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Width (X) | 20 mm | 12 – 40 |
| Plate Length (Y) | 40 mm | 24 – 70 |
| Plate Thickness | 5 mm | 3 – 10 |
| Chassis Screw Hole Dia | 3.2 mm | 2 – 5 |
| Chassis Screw Spacing | 30 mm | 16 – 60 |
| Counterbore Dia | 6 mm | 3.5 – 10 |
| Counterbore Depth | 1.8 mm | 0.5 – 3 |
| Clamp Boss Dia | 14 mm | 9 – 24 |
| Clamp Boss Height | 9 mm | 4 – 20 |
| Pivot Pin Bore Dia | 3.2 mm | 2 – 8 |
| Split Slot Width | 1 mm | 0.6 – 3 |
| Clamp Screw Hole Dia | 3.2 mm | 2 – 5 |
| Clamp Screw Inset From Rim | 2.5 mm | 1 – 5 |
| Boss Base Fillet | 1.2 mm | 0 – 2.5 |
| Pivot Inboard Offset | 0 mm | -6 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.