Brackets and mounts
RC CatchX Bait Boat
- Bounding box
- 655 × 380 × 283 mm
- Engine
- 3D Printing B-rep
- Parameters
- 33
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
Design a fully functional, 3D-printable RC carp bait boat inspired by the CatchX Mini. Create a 550 × 380 mm twin-hull catamaran with streamlined bows, waterproof compartments and a removable top deck. Include a central 2 kg bait hopper with servo-operated release doors, two rear brushless motor mounts with propeller guards, a waterproof electronics compartment, GPS antenna mount and battery tray. Design for PETG/ASA FDM printing, with modular hull sections, screw connections, sealing surfaces and internal reinforcement. Prioritise real-world functionality, buoyancy, stability and easy assembly. Generate editable mechanical CAD, not just a visual model.
Parameters
| Name | Value | Range |
|---|---|---|
| Hull length | 550 mm | 400 – 800 |
| Hull width | 95 mm | 60 – 150 |
| Hull height | 110 mm | 80 – 160 |
| Overall beam | 380 mm | 300 – 600 |
| Hull shell wall | 3 mm | 2 – 6 |
| Deck length | 360 mm | 250 – 500 |
| Deck width | 300 mm | 200 – 400 |
| Deck thickness | 25 mm | 10 – 40 |
| Gasket length | 340 mm | 200 – 400 |
| Gasket width | 280 mm | 150 – 350 |
| Gasket thickness | 3 mm | 1 – 5 |
| Hopper length | 180 mm | 120 – 240 |
| Hopper width | 160 mm | 120 – 220 |
| Hopper height | 150 mm | 100 – 220 |
| Hopper wall thickness | 3 mm | 2 – 6 |
| Release door length | 70 mm | 50 – 100 |
| Release door width | 55 mm | 40 – 80 |
| Release door thickness | 6 mm | 3 – 10 |
| Electronics box length | 170 mm | 100 – 220 |
| Electronics box width | 120 mm | 80 – 180 |
| Electronics box height | 75 mm | 40 – 120 |
| Battery tray length | 190 mm | 120 – 260 |
| Battery tray width | 110 mm | 80 – 180 |
| Battery tray height | 25 mm | 15 – 40 |
| Motor mount body length | 60 mm | 40 – 100 |
| Motor mount body width | 50 mm | 40 – 80 |
| Motor mount body height | 40 mm | 30 – 70 |
| Propeller guard diameter | 80 mm | 60 – 120 |
| Guard ring thickness | 4 mm | 2 – 8 |
| GPS mount length | 40 mm | 30 – 80 |
| GPS mount width | 40 mm | 30 – 80 |
| GPS mount height | 25 mm | 15 – 50 |
| Reinforcement frame thickness | 5 mm | 3 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and