Jigs and fixtures
Ratchet Wheel 30T
- Bounding box
- 3.3 × 3.2 × 5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 10
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a 3D-printable mechanical ratchet wheel in millimeters, designed for a mainspring arbor. Ratchet Wheel Specifications: • Profile: Asymmetrical sawtooth ratchet wheel (30 teeth, Module 2.0). • Outer Diameter: 60 mm. • Root Diameter: 53.8 mm (3.1 mm tooth height). • Tooth Geometry: Steep locking face with a 10-degree inward undercut so a pawl hooks inward under load, and a sloped back ramp (~35 degrees) for smooth one-way winding. • Fillets & Lands: Add a 0.5 mm fillet radius to all tooth roots to prevent stress cracking, and a 0.3 mm flat land on the tooth tips so they don't chip. • Thickness (Face Width): 5 mm. • Center Bore: Centered 6.30 mm × 6.30 mm square through-hole (with slight 0.2 mm corner fillets to reduce stress concentration on the square shaft).
Parameters
| Name | Value | Range |
|---|---|---|
| Tooth count | 30 mm | 8 – 72 |
| Outer diameter | 60 mm | 20 – 120 |
| Root diameter | 53.8 mm | 20 – 110 |
| Face width | 5 mm | 1 – 20 |
| Tooth tip flat land | 0.3 mm | 0.2 – 2 |
| Tooth root fillet radius | 0.5 mm | 0 – 1.5 |
| Locking face undercut, from radial | 10 deg | 0 – 30 |
| Back ramp angle, from radial | 40 deg | 10 – 60 |
| Square bore side | 6.3 mm | 2 – 20 |
| Bore corner radius | 0.2 mm | 0 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
