Mechanical parts
Quadcopter with Elongated Servo Gripper
- Bounding box
- 299.7 × 299.7 × 167.4 mm
- Engine
- Precision B-rep
- Parameters
- 46
- Published
- October 13, 2026
Download
Free to download and use. See the terms.
The prompt
elongate the gripper arms to a longer length
Parameters
| Name | Value | Range |
|---|---|---|
| Arm Length | 120 mm | 60 – 250 |
| Arm Width | 20 mm | 8 – 40 |
| Frame Thickness | 4 mm | 2 – 10 |
| Body Diameter | 90 mm | 40 – 180 |
| Hub Diameter | 50 mm | 20 – 100 |
| Hub Height | 12 mm | 4 – 40 |
| Motor Pod Diameter | 30 mm | 16 – 60 |
| Motor Pod Height | 12 mm | 5 – 30 |
| Motor Shaft Bore | 6 mm | 2 – 16 |
| Motor Bolt Hole Dia | 3 mm | 1.5 – 6 |
| Motor Bolt Circle | 19 mm | 8 – 40 |
| Motor Bolt Count | 4 count | 2 – 8 |
| Guard Outer Dia | 130 mm | 60 – 260 |
| Guard Inner Dia | 120 mm | 50 – 250 |
| Guard Ring Thickness | 3 mm | 1 – 10 |
| Guard Ring Bottom Z | 4 mm | 0 – 30 |
| Guard Strut Width | 4 mm | 1 – 12 |
| Guard Strut Height | 4 mm | 1 – 12 |
| Skid Rail Length | 90 mm | 40 – 200 |
| Skid Rail Width | 12 mm | 4 – 40 |
| Skid Rail Height | 8 mm | 3 – 30 |
| Skid Rail Offset | 60 mm | 20 – 150 |
| Skid Leg Offset | 25 mm | 10 – 80 |
| Skid Leg Dia | 6 mm | 2 – 18 |
| Skid Drop | 22 mm | 5 – 60 |
| Canopy Width | 30 mm | 12 – 80 |
| Canopy Depth | 24 mm | 10 – 70 |
| Canopy Height | 16 mm | 6 – 50 |
| Lens Diameter | 12 mm | 4 – 40 |
| Lens Length | 14 mm | 4 – 50 |
| Gripper Mount Width | 40 mm | 20 – 120 |
| Gripper Mount Depth | 30 mm | 15 – 100 |
| Gripper Mount Thickness | 6 mm | 2 – 20 |
| Servo Body Width | 20 mm | 10 – 60 |
| Servo Body Depth | 40 mm | 15 – 90 |
| Servo Body Height | 36 mm | 12 – 80 |
| Jaw Carrier Width | 40 mm | 20 – 120 |
| Jaw Carrier Depth | 20 mm | 8 – 60 |
| Jaw Carrier Height | 20 mm | 6 – 60 |
| Gripper Wall Thickness | 4 mm | 1.5 – 12 |
| Jaw Gap (open) | 20 mm | 5 – 120 |
| Jaw Length (elongated) | 90 mm | 30 – 220 |
| Jaw Width | 12 mm | 4 – 40 |
| Jaw Thickness | 5 mm | 2 – 20 |
| Jaw Pivot Pin Dia | 4 mm | 1.5 – 12 |
| Jaw Open Angle | 20 deg | 0 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.