Mechanical parts
Quadcopter Propeller Set
- Bounding box
- 533.6 × 306.0 × 21.9 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
pleae maintain dianmetw 0.267m a shaft of 0.006m for the four properles
Parameters
| Name | Value | Range |
|---|---|---|
| Propeller diameter | 267 mm | 100 – 500 |
| Hub diameter | 40 mm | 20 – 100 |
| Hub height | 12 mm | 5 – 40 |
| Shaft / bore diameter | 6 mm | 2 – 20 |
| Motor spacing (opposite centres) | 266 mm | 200 – 600 |
| Propeller pitch | 140 mm | 50 – 300 |
| Blade count | 2 count | 2 – 6 |
| Max blade angle | 65 deg | 10 – 85 |
| Root blend fraction | 0.3 | 0.15 – 0.95 |
| Root chord | 32 mm | 10 – 80 |
| Tip chord | 16 mm | 5 – 50 |
| Root thickness | 6 mm | 2 – 20 |
| Tip thickness | 2.5 mm | 1 – 15 |
| Airfoil camber | 4 % | 0 – 15 |
| Airfoil camber position | 40 % chord | 5 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.