Jigs and fixtures
Pyramid Three-Way Base Corner Connector
- Bounding box
- 131.5 × 131.5 × 106.3 mm
- Engine
- 3D Printing B-rep
- Parameters
- 16
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Design a single-piece, precision-engineered, 3D-printable three-way base corner connector for a modular Great Pyramid of Giza wireframe. IMPORTANT: The entire connector, INCLUDING THE FLOOR-CONTACT FOOT, must be one integrated component. Do not create separate foot components or unnecessary detachable parts. PYRAMID GEOMETRY: - Height: 1,200 mm. - Square base: 1,885 × 1,885 mm. - Inclined rod centre-line length: approximately 1,793 mm. - Inclined rod angle: 51.84° relative to horizontal. - Horizontal base rods meet at exactly 90°. SOCKET CONFIGURATION: Three receiving sockets: 1. First horizontal base rod. 2. Second horizontal base rod. 3. One inclined rod connecting to the apex. GEOMETRY: - Two horizontal sockets positioned at exactly 90°. - Inclined socket positioned at 51.84° above the horizontal base plane. - Inclined rod must point precisely towards the pyramid's vertical centreline. - All three rod centre-lines must intersect at the same theoretical base corner point. - All sockets must be compatible with the universal 30 mm modular rod connection system. - Incorporate keyed anti-rotation interfaces and positive mechanical locking compatibility. INTEGRATED FLOOR FOOT: - Form the floor-contact foot as an integral extension of the connector body. - Flat, stable underside. - Slightly enlarged footprint for stability. - Recessed provision for an optional replaceable non-slip rubber pad. - Reinforced transitions between the foot and connector body. - The foot must not alter the theoretical rod centre-line intersection or pyramid geometry. CONSTRUCTION: - Single-piece structural body. - Reinforced material around all three socket junctions. - Generous wall thickness. - Rounded transitions to minimise stress concentrations. - No unnecessary detachable components. - No permanent adhesive required for rod connections. SYMMETRY: Produce one standard connector design that can be rotated or mirrored appropriately for all four pyramid corners. PRINTING: - Maximum build volume: 210 × 210 × 250 mm. - Optimise geometry for FDM printing. - Avoid unsupported overhangs where possible. - Ensure sufficient layer adhesion in critical load-bearing areas. OUTPUT: Generate one watertight, manifold STL file representing the complete integrated connector, including its floor foot. Do not generate rods, locking collars or the complete pyramid.
Parameters
| Name | Value | Range |
|---|---|---|
| Nominal rod diameter | 30 mm | 10 – 50 |
| Sliding clearance per side | 0.3 mm | 0.1 – 0.8 |
| Socket insertion depth | 55 mm | 25 – 100 |
| Wall thickness around sockets | 7 mm | 4 – 12 |
| Central hub diameter | 58 mm | 30 – 90 |
| Anti-rotation key width | 4 mm | 2 – 8 |
| Anti-rotation key depth | 1.2 mm | 0.4 – 3 |
| Cross locking pin hole diameter | 6.2 mm | 3 – 10 |
| Lock hole distance from socket mouth | 18 mm | 10 – 40 |
| Foot footprint | 95 mm | 50 – 150 |
| Foot base thickness | 10 mm | 4 – 20 |
| Foot corner rounding diameter | 14 mm | 4 – 30 |
| Rubber pad recess diameter | 52 mm | 20 – 80 |
| Rubber pad recess depth | 2.5 mm | 1 – 5 |
| Rod intersection height above bed | 55 mm | 20 – 100 |
| Inclined socket elevation | 51.84 deg | 0 – 90 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
