Jigs and fixtures
Pyramid Base Corner Connector
- Bounding box
- 106.0 × 106.0 × 102.6 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Design a SINGLE-PIECE, fully integrated, three-way base corner connector for a modular Great Pyramid of Giza wireframe. The entire connector body must be manufactured as ONE component. Do not split the structural connector into multiple pieces. PYRAMID GEOMETRY: - Height: 1,200 mm. - Square base: 1,885 × 1,885 mm. - Inclined rod angle: 51.84° relative to horizontal. - Horizontal base rod angle: exactly 90°. THREE INTEGRATED SOCKETS: 1. First horizontal rod socket. 2. Second horizontal rod socket. 3. Inclined rod socket pointing towards the pyramid apex. GEOMETRY: - All three socket centre-lines must intersect at one theoretical base corner point. - Horizontal sockets must meet at exactly 90°. - Inclined socket must be positioned at precisely 51.84° above the horizontal plane. - Its horizontal projection must point towards the exact centre of the square pyramid. - Calculate the complete three-dimensional socket orientations mathematically. CONSTRUCTION: - One continuous, integrated connector body. - No separately printed structural arms. - Reinforced central junction. - Generous material around socket transitions. - Smooth fillets to minimise stress concentrations. - Integrated keyed interfaces compatible with the universal 30 mm modular rod system. - Integrated mechanical locking provisions compatible with the universal locking collar. - No friction-only connections. - No adhesive. DURABILITY: Designed for repeated assembly and disassembly over several years. Prioritise structural rigidity, resistance to cracking and dimensional stability. PRINTING: - Maximum printer dimensions: 210 × 210 × 250 mm. - The complete connector must fit within these dimensions. - Optimise orientation for FDM printing and layer strength. - Avoid unnecessary supports and overhangs. OUTPUT: Generate one complete, watertight, manifold STL file representing the entire base corner connector. The rods and locking collars must remain detachable. Only the connector body itself is permanently integrated.
Parameters
| Name | Value | Range |
|---|---|---|
| Rod diameter | 30 mm | 20 – 40 |
| Socket radial clearance | 0.3 mm | 0.1 – 0.5 |
| Socket depth | 48 mm | 35 – 65 |
| Boss outer diameter | 48 mm | 40 – 60 |
| Boss length from centre | 80 mm | 65 – 95 |
| Central hub radius | 26 mm | 20 – 35 |
| Keyway width | 5 mm | 2 – 8 |
| Keyway depth | 2.5 mm | 1 – 4 |
| Locking ridge height | 2 mm | 1 – 4 |
| Locking ridge width | 4 mm | 2 – 8 |
| Locking ridge distance from opening | 8 mm | 4 – 15 |
| Stress-relief fillet radius | 3 mm | 0.5 – 5 |
| Inclined rod angle from horizontal | 51.84 deg | 40 – 60 |
| Horizontal rod included angle | 90 deg | 70 – 110 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
