Mechanical parts
Prosthetic Mechanical Limb Link
- Bounding box
- 247.0 × 30.0 × 8.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- September 16, 2026
Download
Free to download and use. See the terms.
The prompt
a set of mechanical limbs to act as prosthetic for a persons current arms while remaining as their own separate limbs
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length (Joint Centers) | 220 mm | 120 – 350 |
| Link Width | 16 mm | 8 – 24 |
| Link Thickness | 8 mm | 4 – 16 |
| Proximal Joint Diameter | 30 mm | 22 – 50 |
| Proximal Bore Diameter | 10 mm | 4 – 14 |
| Distal Joint Diameter | 24 mm | 16 – 40 |
| Distal Bore Diameter | 8 mm | 3 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.