Fittings and adapters
PN16 Slip-On Flanges DN80 and DN200
- Bounding box
- 590 × 340 × 38 mm
- Engine
- 3D Printing B-rep
- Parameters
- 22
- Published
- November 9, 2026
Download
Free to download and use. See the terms.
The prompt
Based on the attached design 2 slip on PN 16 flanges - one for Dn 80 and one for Dn 200
Parameters
| Name | Value | Range |
|---|---|---|
| Flange outer diameter | 200 mm | 60 – 400 |
| Plate thickness | 20 mm | 6 – 60 |
| Bolt circle diameter | 160 mm | 30 – 360 |
| Bolt hole diameter | 18 mm | 3 – 30 |
| Bolt hole count | 8 mm | 3 – 24 |
| Raised face diameter | 132 mm | 20 – 360 |
| Raised face height | 3 mm | 0.6 – 10 |
| Hub diameter | 112 mm | 20 – 360 |
| Hub height above plate | 12 mm | 2 – 80 |
| Pipe bore diameter | 89.5 mm | 10 – 360 |
| Edge chamfer | 2 mm | 0 – 8 |
| Flange outer diameter | 340 mm | 60 – 500 |
| Plate thickness | 24 mm | 6 – 80 |
| Bolt circle diameter | 295 mm | 30 – 460 |
| Bolt hole diameter | 22 mm | 3 – 34 |
| Bolt hole count | 12 mm | 3 – 32 |
| Raised face diameter | 265 mm | 20 – 460 |
| Raised face height | 3 mm | 0.6 – 10 |
| Hub diameter | 235 mm | 20 – 460 |
| Hub height above plate | 14 mm | 2 – 90 |
| Pipe bore diameter | 220.2 mm | 10 – 460 |
| Edge chamfer | 2.5 mm | 0 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →SM1 to RMS Thread Adapter
thorlabs SM1A3 adapter has external SM1 (1.035"-40) threading and internal RMS (0.800"-36) threading.
Linear Guide Carriage Block
Create a heavy-duty mechanical linear guide carriage block for an inclined spindleless veneer peeling machine. Overall Dimensions: - Length (X-axis): 200 mm - Width (Y-axis): 150
Threaded Step-Shaft Stub/Nipple
Subject: 3D model of a rotation symmetric step-shaft fitting (stub/nipple) with axial bored hole and external/internal threads. Dimensions and Geometry Details: * Total length: 44
Rocket Fin Sets - Attached
now make it so that the fins are attatched to the adapters.
Step-Shaft Nipple with Through-Bore
Model_Type: Rotation-symmetric step-shaft fitting (nipple) with a central axial through-hole. Total_Length: 44.0 mm Coordinate_System: X-axis from Left (X=0) to Right (X=44) 1. LE
Model Rocket Fin Set Assembly
For each fin set, the fins should be connected to the adapter creating an assemble.