Mechanical parts
Placa especimen de capas - proyecto topografico
- Bounding box
- 130.0 × 110.0 × 9.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- October 3, 2026
Download
Free to download and use. See the terms.
The prompt
Crea las siguientes capas (layers) con sus propiedades de color y grosor de línea para un proyecto topográfico: 1. Capa "01_POLIGONO": Color Rojo (Index 10), grosor 0.50 mm, tipo de línea Continua. 2. Capa "02_CURVAS_MAESTRAS": Color Magenta (Index 6), grosor 0.35 mm, tipo de línea Continua. 3. Capa "03_CURVAS_INTERMEDIAS": Color Gris claro (Index 8 o 9), grosor 0.15 mm, tipo de línea Continua. 4. Capa "04_EJE_PERFIL": Color Cyan (Index 4), grosor 0.30 mm, tipo de línea Trazo y punto (DASHED o CENTER). 5. Capa "05_COTAS_TEXTOS": Color Amarillo (Index 2), grosor 0.20 mm, tipo de línea Continua. 6. Capa "06_CUADRO_TECNICO": Color Blanco/Negro (Index 7), grosor 0.25 mm, tipo de línea Continua. 7. Capa "07_PERFIL_TERRENO": Color Verde (Index 3), grosor 0.40 mm, tipo de línea Continua. 8. Capa "08_PERFIL_RASANTE": Color Azul (Index 5), grosor 0.35 mm, tipo de línea Continua. Establece las unidades del dibujo en Metros con precisión de 2 decimales para distancias y coordenadas UTM, y ángulos en Grados/Minutos/Segundos.
Parameters
| Name | Value | Range |
|---|---|---|
| Longitud de franja | 110 mm | 60 – 200 |
| Ancho de franja | 6 mm | 3 – 15 |
| Espesor de plancha base | 4 mm | 2 – 10 |
| Radio de esquina | 3 mm | 0.5 – 15 |
| Escala pluma -> altura | 10 x | 4 – 20 |
| 01_POLIGONO (rojo 10) | 0.5 mm | 0.05 – 1 |
| 02_CURVAS_MAESTRAS (magenta 6) | 0.35 mm | 0.05 – 1 |
| 03_CURVAS_INTERMEDIAS (gris 9) | 0.15 mm | 0.05 – 1 |
| 04_EJE_PERFIL (cyan 4) | 0.3 mm | 0.05 – 1 |
| 05_COTAS_TEXTOS (amarillo 2) | 0.2 mm | 0.05 – 1 |
| 06_CUADRO_TECNICO (blanco 7) | 0.25 mm | 0.05 – 1 |
| 07_PERFIL_TERRENO (verde 3) | 0.4 mm | 0.05 – 1 |
| 08_PERFIL_RASANTE (azul 5) | 0.35 mm | 0.05 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.