Mechanical parts
Placa balística de captura con dos orificios
- Bounding box
- 800.0 × 1600.0 × 25.0 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- October 24, 2026
Download
Free to download and use. See the terms.
The prompt
PUEDES AYUDARME A GENERAR UN PLANO COMO ESTE, CON LAS MISMAS MEDIDAS
Parameters
| Name | Value | Range |
|---|---|---|
| Ancho de placa (X) | 800 mm | 200 – 2000 |
| Alto de placa (Y) | 1600 mm | 400 – 3000 |
| Espesor de placa (Z) | 25 mm | 5 – 100 |
| Diámetro de orificio | 8 mm | 3 – 30 |
| X de orificios desde borde izq. | 350 mm | 20 – 780 |
| Orificio 1 – altura Y | 1100 mm | 30 – 2950 |
| Orificio 2 – altura Y | 700 mm | 30 – 2950 |
| Radio de esquinas | 60 mm | 0 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.