Mechanical parts
Piston Rod M16 with Clevis Eye
- Bounding box
- 250 × 44 × 25 mm
- Engine
- 3D Printing B-rep
- Parameters
- 8
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
Cylindrical piston rod, 250 mm length, 25 mm shaft diameter, with an M16 threaded end and clevis eye
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length | 250 mm | 120 – 400 |
| Shaft diameter | 25 mm | 10 – 60 |
| Thread major diameter - M16 | 16 mm | 8 – 30 |
| Threaded length | 40 mm | 15 – 80 |
| Thread pitch | 2 mm | 1 – 3 |
| Eye outer diameter | 44 mm | 24 – 100 |
| Eye pin bore diameter | 16 mm | 6 – 60 |
| Eye width / bore length | 25 mm | 8 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.