Mechanical parts
Pipe Plug
- Bounding box
- 25.4 × 25.4 × 50.8 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
This will be a plug. It will start with 1 in stainless steel bar stock 2 in long. 1.25 in will be turned down to a diameter to fit into a 3/4 inch scheduled 40 stainless steel pipe. In the end of the plug that is not machined we will bore a 12 mm hole .75 in deep. 1/2 in from the end of the plug will reward the hole we will drill radially from the outside into the board hole for a 1032 screw and it will be tapped
Parameters
| Name | Value | Range |
|---|---|---|
| Bar Diameter | 25.4 mm | 5 – 100 |
| Total Length | 50.8 mm | 10 – 200 |
| Turned Length | 31.75 mm | 0 – 100 |
| Turned Diameter (pipe ID) | 20.93 mm | 5 – 50 |
| Axial Bore Diameter | 12 mm | 3 – 30 |
| Axial Bore Depth | 19.05 mm | 0 – 50 |
| Radial Hole Distance from Head End | 12.7 mm | 0 – 50 |
| Radial Hole Diameter (tap drill) | 4 mm | 1 – 10 |
| End Chamfer (turned end) | 0.5 mm | 0 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.