Mechanical parts
Pipe Load Test Assembly
- Bounding box
- 1200.7 × 1040.0 × 1616.2 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- October 4, 2026
Download
Free to download and use. See the terms.
The prompt
Let me say pipe size 40 inch pipe lateral movel should stop with stopper from the below beam from pipe bottom to beam is 580 mm , we are doing pipe load check at pipe bottom by slightly lifting. the beam width 300 mm with 20 mm thick the arrgement is first above beam load cell will come with lenght of 162 mm and 132 dia and after jack 120 mm lenght and 120 mm dia and balnce space for out of 580 will put spacer but at top the should make curve according to the pipe curve bottom. we have tlaked about pipe lateral stopper from beam to pipe sides two sides for load cell we have to make stopper in all 4 dirction in the 300 mm width beam
Parameters
| Name | Value | Range |
|---|---|---|
| Beam Length | 1000 mm | 500 – 2000 |
| Beam Width | 300 mm | 100 – 600 |
| Beam Thickness | 20 mm | 5 – 100 |
| Load Cell Diameter | 132 mm | 50 – 300 |
| Load Cell Height | 162 mm | 50 – 300 |
| Jack Diameter | 120 mm | 50 – 300 |
| Jack Height | 120 mm | 50 – 300 |
| Spacer Base Diameter | 120 mm | 50 – 200 |
| Spacer Height | 298 mm | 100 – 500 |
| Pipe Outer Diameter | 1016 mm | 500 – 2000 |
| Pipe Length | 1200 mm | 500 – 3000 |
| Lateral Stopper Thickness | 20 mm | 5 – 60 |
| Lateral Stopper Height | 1100 mm | 500 – 2000 |
| Lateral Stopper Length | 300 mm | 100 – 800 |
| Lateral Stopper Pipe Overlap | 8 mm | 0 – 18 |
| Load Cell Stopper X Size | 50 mm | 10 – 100 |
| Load Cell Stopper Y Size | 50 mm | 10 – 100 |
| Load Cell Stopper Z Size | 30 mm | 10 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.