Mechanical parts
peanut_pod
- Bounding box
- 12.0 × 8.0 × 42.5 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
create cad file for areanuts as well make two variations
Parameters
| Name | Value | Range |
|---|---|---|
| Pod Length | 35 mm | 20 – 60 |
| Pod Diameter | 12 mm | 8 – 20 |
| Shell Thickness | 0.8 mm | 0.4 – 2 |
| Kernel Length | 15 mm | 10 – 30 |
| Kernel Diameter | 8 mm | 5 – 15 |
| Rib Count (0 = smooth) | 0 | 0 – 12 |
| Rib Height | 0.5 mm | 0.2 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.