Mechanical parts
Peanut Jar Funnel
- Bounding box
- 180.0 × 90.0 × 70 mm
- Engine
- 3D Printing B-rep
- Parameters
- 9
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
Make an ergonomic funnel that can attach to a screw top container of radius 60mm witha 2mm protusion of a thread. Using the ideation drawings provided, the funnel opening should be peanut shaped , 180mm x 90 in width. the screw cap attachment should be more towards the back of the funnel.
Parameters
| Name | Value | Range |
|---|---|---|
| Opening length | 180 mm | 120 – 260 |
| Opening width | 90 mm | 60 – 140 |
| Rim height above the jar | 70 mm | 40 – 140 |
| Container neck diameter | 60 mm | 30 – 110 |
| Thread protrusion | 2 mm | 0.5 – 4 |
| Thread pitch | 6 mm | 2 – 12 |
| Threaded skirt height | 18 mm | 10 – 40 |
| Wall thickness | 3 mm | 1.2 – 6 |
| Sliding fit clearance | 0.3 mm | 0.1 – 0.6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.