Enclosures and housings
Orange Pi 4 Pro fan case with M.2 bay
- Bounding box
- 98 × 84 × 42.6 mm
- Engine
- 3D Printing B-rep
- Parameters
- 27
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
I want you to make me an Orange pi 4 pro case it will be fixed with a screw there will be fan inlet lines on the box bidet orange pi 4 pro November sd card will be inside the case m2 ssd cooler block will be in the gap until it can be installed 1cm there will be air outlet lines on the sd card side so that air can come out
Parameters
| Name | Value | Range |
|---|---|---|
| PCB length X | 90 mm | 60 – 120 |
| PCB width Y | 65 mm | 40 – 100 |
| PCB thickness | 1.6 mm | 1 – 3 |
| Mounting hole spacing X | 58 mm | 30 – 110 |
| Mounting hole spacing Y | 49 mm | 30 – 90 |
| Standoff diameter | 6 mm | 4 – 10 |
| Wall thickness | 2.5 mm | 1.2 – 5 |
| Floor thickness | 2.5 mm | 1.2 – 5 |
| Board-to-wall clearance | 1.5 mm | 0.5 – 5 |
| Free height above PCB | 16 mm | 10 – 30 |
| Extra width for the screw post | 11 mm | 10 – 25 |
| Corner radius | 4 mm | 1 – 12 |
| Clearance above SSD for cooler block | 10 mm | 4 – 20 |
| SSD platform height | 3 mm | 1 – 6 |
| SSD + connector height | 2.5 mm | 1 – 5 |
| SSD platform length | 82 mm | 40 – 90 |
| SSD platform width | 26 mm | 18 – 30 |
| Fan size | 40 mm | 30 – 80 |
| Fan screw hole spacing | 32 mm | 20 – 70 |
| Fan screw pilot diameter | 2.7 mm | 2 – 4 |
| Fan boss height | 4 mm | 2 – 10 |
| Vent slot width | 3 mm | 1.5 – 8 |
| Gap between vent slots | 3 mm | 1.5 – 8 |
| Outlet slot count | 7 mm | 3 – 9 |
| Case screw clearance diameter | 3.4 mm | 2.5 – 5 |
| Case screw pilot diameter | 2.6 mm | 2 – 4 |
| Board screw pilot diameter | 2.1 mm | 1.6 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Lego 1x4 Technic Brick
Create a precise 3D CAD model of a single 1x4 Lego Technic-compatible brick designed for STEM robotics. The main rectangular body must have exact dimensions: 31.8 mm in length, 7.8
Honeycomb Flow Straightener
Create a single-piece, 3D-printable honeycomb flow straightener for a DIY wind tunnel. Exact dimensions: Outer width: 200 mm Outer height: 200 mm Depth: 60 mm Hexagonal honeyc
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Desktop Air Purifier Assembly
# DESIGN: PORTABLE DESKTOP AIR PURIFIER WITH MINIATURE CENTRIFUGAL FAN Create a detailed, dimensionally accurate, 3D mechanical CAD assembly of a compact portable desktop air puri
Oval Safety Snap Carabiner
Create a simple alloy steel safety snap carabiner for me to download to solidworks. I should be able to link it to a ring of another part in solidworks.
