Enclosures and housings
Honeycomb Flow Straightener
- Bounding box
- 200 × 200 × 60 mm
- Engine
- 3D Printing B-rep
- Parameters
- 6
- Published
- November 9, 2026
Download
Free to download and use. See the terms.
The prompt
Create a single-piece, 3D-printable honeycomb flow straightener for a DIY wind tunnel. Exact dimensions: Outer width: 200 mm Outer height: 200 mm Depth: 60 mm Hexagonal honeycomb cells Clear cell width: 6 mm Wall thickness: 1.2 mm Outer frame thickness: 3 mm Requirements: The entire structure must be one connected solid. No separate tiles or assembly parts. All honeycomb cells must be open from front to back. The geometry must be suitable for FDM 3D printing. Export as one STL file. Preserve all dimensions accurately.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer width | 200 mm | 20 – 400 |
| Outer height | 200 mm | 20 – 400 |
| Depth | 60 mm | 1 – 200 |
| Clear cell width across flats | 6 mm | 2 – 20 |
| Wall thickness | 1.2 mm | 0.8 – 6 |
| Outer frame thickness | 3 mm | 1 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Immersion Cooling Enclosure
Design a sealed high-pressure dielectric immersion cooling enclosure for cylindrical battery cells. Internal cavity dimensions: 540mm length, 360mm width, 160mm height with 6mm wal
Simple BWB with Propulsion Tube
Prompt: "A simple, solid Blended Wing Body (BWB) flying wing. Dimensions: wingspan 6.5 meters, center chord 1.53 meters, root thickness 35 centimeters, tapering to 15 centimeters a
Engranaje recto 50 dientes, módulo 2
Engranaje recto de 50 dientes, diámetro exterior 104 mm, diámetro de raíz 95 mm, espesor 10 mm y ángulo de presión 20°. Crear como sólido 3D con un agujero central de 8.2 mm de diá
G+1 Party Hall Structural Shell
G+1 Party Hall – AutoCAD Design Prompt Design a G+1 RCC-framed Party Hall in AutoCAD with detailed Ground Floor Plan, First Floor Plan, and all-side elevations (front, rear, left
Default Spur Gear
La costruzione dovrà prevedere i seguenti spazi: 1. Zona Giorno (Piano Terra)-Totale:~110 mg • Ingresso / Disimpegno con guardaroba: 10 mg • Soggiorno / Area Living: 40 mq (ampio,