Mechanical parts
Open-Top Chassis with RS-550 Motor Mount
- Bounding box
- 320.0 × 220.0 × 180.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- September 30, 2026
Download
Free to download and use. See the terms.
The prompt
Add a centered motor platform on the bottom measuring 100 x 100 x 8 mm. Add four integrated vertical support posts around it designed for an RS-550 motor with 38 mm internal diameter clearance, shaft pointing upward, and M4 clearance holes.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Length | 320 mm | 100 – 800 |
| Outer Width | 220 mm | 80 – 600 |
| Outer Height | 180 mm | 40 – 500 |
| Wall Thickness | 4 mm | 2 – 12 |
| Floor Thickness | 5 mm | 2 – 15 |
| Platform Length | 100 mm | 40 – 200 |
| Platform Width | 100 mm | 40 – 200 |
| Platform Thickness | 8 mm | 3 – 25 |
| Motor Can Clearance (Dia) | 38 mm | 20 – 60 |
| Post Cross-Section | 12 mm | 6 – 18 |
| Post Height Above Platform | 60 mm | 15 – 150 |
| M4 Clearance Hole Dia | 4.5 mm | 2 – 10 |
| Clamp Hole Height Above Platform | 25 mm | 5 – 120 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.