Mechanical parts
Open Cube Frame
- Bounding box
- 100.0 × 100.0 × 113.5 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- October 13, 2026
Download
Free to download and use. See the terms.
The prompt
Create a one-piece, 3D-printable Cube Overall dimensions: 100 × 100 × 113.5 mm. Structure: Four vertical corner rails connected by integrated top and bottom horizontal rails. Corner rails: 10 × 10 mm square cross-section. Openings: Four open sides, open top, and open bottom. leave Screw holes for M2.5 on each end of the cube
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Footprint | 100 mm | 50 – 300 |
| Cube Height | 113.5 mm | 40 – 400 |
| Rail Cross-Section | 10 mm | 4 – 15 |
| Screw Hole Dia (M2.5 clear) | 2.7 mm | 1 – 8 |
| Screw Hole Depth | 15 mm | 3 – 60 |
| Vertical Edge Round | 1.5 mm | 0 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.