Jigs and fixtures
Office Drawer Cabinet
- Bounding box
- 515 × 537 × 770 mm
- Engine
- 3D Printing B-rep
- Parameters
- 25
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Contexto: Preciso que você crie um modelo 3D detalhado (ou um script/código em formato de especificação geométrica) para a fabricação e visualização de um gaveteiro de escritório com base nas seguintes características físicas e componentes: 1. Dimensões Externas: - Largura: 51,5 cm - Profundidade: 51,5 cm - Altura: 77,0 cm 2. Estrutura Externa (Corpo): - Cor/Material: Tom de madeira clara (marrom). - Componentes: 2 painéis laterais, 1 painel superior e 1 base inferior. 3. Gavetas (4 unidades no total): - Estrutura: Cada gaveta possui 3 molduras laterais/traseiras, 1 base e 1 frente na cor branca (contrastando com a estrutura amadeirada). - Puxadores: Cada uma das 4 gavetas possui um puxador metálico horizontal instalado centralmente na frente branca. - Fechadura: Apenas a gaveta superior (a segunda a partir do topo) possui uma fechadura integrada em sua parte frontal lateral. 4. Acessórios Inferiores: - 4 mini pés fixados na base inferior do gaveteiro. - 8 suportes internos para fixação e deslizamento das gavetas nas paredes laterais (4 por lateral).
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width | 515 mm | 300 – 900 |
| Overall depth | 515 mm | 300 – 900 |
| Overall height including feet | 770 mm | 400 – 1200 |
| Body panel thickness | 18 mm | 10 – 30 |
| Foot height | 20 mm | 5 – 60 |
| Foot diameter | 40 mm | 20 – 80 |
| Foot inset from edges | 55 mm | 20 – 150 |
| Number of drawers | 4 mm | 2 – 6 |
| Gap between drawer fronts | 3 mm | 1 – 10 |
| Side clearance per side | 2 mm | 0.5 – 5 |
| Drawer front thickness | 18 mm | 10 – 30 |
| Drawer side/back thickness | 12 mm | 6 – 20 |
| Drawer bottom thickness | 6 mm | 3 – 12 |
| Drawer box depth behind front | 430 mm | 200 – 600 |
| Drawer side vertical inset | 10 mm | 0 – 30 |
| Runner width | 8 mm | 4 – 20 |
| Runner height | 8 mm | 4 – 20 |
| Runner length | 390 mm | 100 – 600 |
| Handle bar length | 160 mm | 80 – 300 |
| Handle bar diameter | 8 mm | 4 – 20 |
| Handle standoff from front | 18 mm | 5 – 40 |
| Lock cylinder diameter | 20 mm | 10 – 40 |
| Lock protrusion | 6 mm | 3 – 15 |
| Lock offset from drawer side | 40 mm | 20 – 150 |
| Drawer carrying the lock (1 = top) | 2 mm | 1 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
