Mechanical parts
NutriCrash - Envoltura y Empaque 5 Barritas
- Bounding box
- 246.6 × 36.8 × 84.0 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- September 29, 2026
Download
Free to download and use. See the terms.
The prompt
Realiza el modelado de una envoltura y empaque de barritas (comida), pensando en que tienen capacidad de 5 barritas y de tamaño de 10 centímetros, realizalos de forma separada, mostrando varias vistas del empaque y envoltura, que sea visible el nombre del producto, se llama NutriCrash, el nombre con colores blanco, azul y verde porfavor
Parameters
| Name | Value | Range |
|---|---|---|
| Longitud de barrita | 100 mm | 40 – 200 |
| Ancho de barrita | 25 mm | 10 – 60 |
| Espesor de barrita | 15 mm | 5 – 40 |
| Capacidad de barritas | 5 pcs | 1 – 12 |
| Holgura envoltura | 2 mm | 0.5 – 8 |
| Espesor película | 0.8 mm | 0.4 – 3 |
| Holgura empaque | 3 mm | 0.5 – 12 |
| Espesor pared cartón | 2.5 mm | 1 – 8 |
| Espesor fondo cartón | 3 mm | 1 – 10 |
| Ancho del rótulo NutriCrash | 62 mm | 20 – 90 |
| Relieve del rótulo | 1.2 mm | 0.4 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.