Mechanical parts
Numbered Tile Spacer Plate
- Bounding box
- 46 × 81 × 9.1 mm
- Engine
- 3D Printing B-rep
- Parameters
- 37
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
this is the tile spacer
Parameters
| Name | Value | Range |
|---|---|---|
| Plate width | 46 mm | 30 – 80 |
| Plate height | 74 mm | 45 – 120 |
| Plate thickness | 4 mm | 2 – 8 |
| Outer corner radius | 6 mm | 0 – 12 |
| Bottom tab width | 18 mm | 8 – 30 |
| Bottom tab protrusion | 7 mm | 0 – 15 |
| Bottom tab taper | 6 mm | 0 – 14 |
| Main window width | 26 mm | 10 – 50 |
| Main window height | 22 mm | 8 – 60 |
| Main window bottom height | 30 mm | 5 – 90 |
| Number window bottom width | 26 mm | 10 – 50 |
| Number window top width | 17 mm | 6 – 40 |
| Number window height | 10 mm | 4 – 30 |
| Number window top height | 68 mm | 10 – 110 |
| Number bridge width | 12 mm | 6 – 30 |
| Mounting hole diameter | 3 mm | 1.5 – 6 |
| Mounting hole spacing | 13.5 mm | 5 – 25 |
| Mounting hole height | 6 mm | 3 – 40 |
| Divider groove depth | 0.8 mm | 0 – 2 |
| Hanger tab width | 14 mm | 6 – 26 |
| Hanger tab length | 12 mm | 4 – 28 |
| Hanger neck width | 8 mm | 4 – 20 |
| Side nub width | 2 mm | 0 – 5 |
| Side nub height | 5 mm | 0 – 12 |
| Raised numeral size | 7 mm | 3 – 12 |
| Numeral emboss height | 0.8 mm | 0.4 – 2 |
| Grout gap / arm thickness | 3 mm | 1 – 12 |
| Arm length from centre | 13 mm | 8 – 25 |
| Body height | 4.5 mm | 2 – 8 |
| Centre hub diameter | 9 mm | 6 – 16 |
| Raised grip hub height | 1.2 mm | 0 – 4 |
| Hub rim chamfer | 0.8 mm | 0.2 – 1.6 |
| Arm-to-hub fillet radius | 2 mm | 0 – 4 |
| Cross spacer centre X | 0 mm | -20 – 20 |
| Cross spacer centre height | 18 mm | 0 – 60 |
| Cross spacer rotation | 45 deg | 0 – 90 |
| Cross spacer fusion depth | 0.6 mm | 0.4 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.
