Brackets and mounts
NEMA 34 L-Mounting Bracket
- Bounding box
- 99 × 106 × 80 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 12, 2026
Download
Free to download and use. See the terms.
The prompt
write mach3 gcode for A standard NEMA 34 mounting bracket uses an 86.0 mm square motor interface with a Ø 73.0 mm central locating bore and four mounting holes arranged on a 98.4 mm bolt circle (69.6 mm square spacing). Standard off-the-shelf L-brackets expand the overall plate footprint to roughly 99 mm × 100 mm with 6.0 mm plate thickness to prevent deflection under high torque.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall plate length | 100 mm | 80 – 200 |
| Overall plate width | 99 mm | 80 – 200 |
| Plate thickness | 6 mm | 3 – 12 |
| Motor interface square | 86 mm | 50 – 120 |
| Central locating bore | 73 mm | 30 – 100 |
| Mounting hole square spacing | 69.6 mm | 40 – 120 |
| Mounting hole diameter | 5.5 mm | 3 – 10 |
| Foot base depth | 80 mm | 40 – 150 |
| Side gusset thickness | 6 mm | 3 – 15 |
| Gusset height along face | 65 mm | 30 – 95 |
| Base mounting slot width | 6.5 mm | 4 – 12 |
| Base mounting slot length | 35 mm | 15 – 60 |
| Distance between base slots | 60 mm | 30 – 85 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and