Mechanical parts
Multi-Function Fueling Gripper
- Bounding box
- 125.0 × 75.0 × 25.0 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- October 1, 2026
Download
Free to download and use. See the terms.
The prompt
Design a gripper for a robotic arm that can open a the gas cap of a car tank, opens the inner threaded cap, holds the fueling gun and pressing its trigger to fuel a car.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 40 mm | 20 – 80 |
| Arm Length | 50 mm | 30 – 100 |
| Crossbar Length | 20 mm | 10 – 40 |
| Arm Thickness | 10 mm | 5 – 25 |
| Cap Grip Gap | 55 mm | 30 – 80 |
| Body Height | 25 mm | 10 – 60 |
| Tooth Length | 6 mm | 2 – 15 |
| Tooth Depth | 2 mm | 0.5 – 10 |
| Tooth Height | 15 mm | 5 – 55 |
| Teeth per Side | 4 | 1 – 10 |
| Fuel Nozzle Bore | 21 mm | 12 – 30 |
| Trigger Tab Length | 15 mm | 5 – 40 |
| Trigger Tab Width | 12 mm | 5 – 30 |
| Trigger Tab Height | 12 mm | 5 – 50 |
| Trigger Tab Y Offset | 20 mm | 0 – 40 |
| Mounting Hole Diameter | 5.5 mm | 2 – 12 |
| Mounting Hole Count | 2 | 1 – 6 |
| Mounting Hole Spacing | 20 mm | 5 – 40 |
| Fillet Radius | 1 mm | 0 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.