Mechanical parts
MRF Sorting Line Assembly
- Bounding box
- 68396.9 × 5000.0 × 4490.8 mm
- Engine
- Precision B-rep
- Parameters
- 41
- Published
- October 9, 2026
Download
Free to download and use. See the terms.
The prompt
Draw tipping area and pre-sorting area by 4 workers, mini loader feed in feeding conveyor, incline conveyor to trommel 10 m to separate the organic/fines material, manual sorting conveyor by 10 workers to shafts, then to balers, magnetic separator for ferous material then windshifter
Parameters
| Name | Value | Range |
|---|---|---|
| Tipping Area Length | 10000 mm | 5000 – 20000 |
| Tipping Area Width | 5000 mm | 2000 – 10000 |
| Tipping Pad Thickness | 300 mm | 150 – 600 |
| Pre-sorting Area Length | 5000 mm | 2000 – 10000 |
| Pre-sorting Area Width | 3000 mm | 1500 – 6000 |
| Pre-sorting Platform Thickness | 300 mm | 150 – 600 |
| Mini Loader Length | 3000 mm | 1500 – 6000 |
| Mini Loader Width | 1500 mm | 800 – 3000 |
| Mini Loader Height | 2000 mm | 1000 – 4000 |
| Loader Bucket Width | 1400 mm | 600 – 2000 |
| Loader Wheel Diameter | 900 mm | 400 – 1500 |
| Feeding Conveyor Length | 8000 mm | 4000 – 12000 |
| Feeding Conveyor Width | 1000 mm | 500 – 2500 |
| Feeding Belt Height | 1000 mm | 500 – 1500 |
| Incline Conveyor Length | 10000 mm | 5000 – 20000 |
| Incline Conveyor Width | 1000 mm | 500 – 2500 |
| Incline Angle | 20 deg | 5 – 45 |
| Incline Belt Thickness | 150 mm | 50 – 400 |
| Trommel Length | 10000 mm | 5000 – 20000 |
| Trommel Diameter | 2500 mm | 1000 – 5000 |
| Trommel Wall Thickness | 30 mm | 10 – 100 |
| Manual Conveyor Length | 10000 mm | 5000 – 20000 |
| Manual Conveyor Width | 1200 mm | 600 – 3000 |
| Manual Belt Height | 1000 mm | 500 – 2000 |
| Worker Station Count | 10 mm | 2 – 20 |
| Station Platform Length | 800 mm | 400 – 2000 |
| Station Platform Width | 800 mm | 400 – 2000 |
| Shaft Width | 2000 mm | 500 – 4000 |
| Shaft Depth | 2000 mm | 500 – 4000 |
| Shaft Height | 3000 mm | 1000 – 8000 |
| Number of Shafts | 2 mm | 1 – 4 |
| Shaft Spacing | 2500 mm | 1500 – 5000 |
| Baler Length | 6000 mm | 3000 – 12000 |
| Baler Width | 2000 mm | 800 – 5000 |
| Baler Height | 3000 mm | 1500 – 6000 |
| Magnetic Separator Length | 3000 mm | 1500 – 6000 |
| Magnetic Separator Width | 1500 mm | 500 – 3000 |
| Magnetic Separator Height | 1500 mm | 500 – 3000 |
| Windshifter Length | 5000 mm | 2000 – 10000 |
| Windshifter Width | 2000 mm | 800 – 5000 |
| Windshifter Height | 3000 mm | 1500 – 6000 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.