Mechanical parts
MP JET Ball Link 2406 (M2, 4 mm ball)
- Bounding box
- 20.2 × 5.4 × 14.2 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
MP JET Type V1 ball link 2406: short white M2/M2 RC ball link, 4 mm brass ball, M2 stud with nut
Parameters
| Name | Value | Range |
|---|---|---|
| Ball center to socket end | 17.5 mm | 10 – 40 |
| Head diameter | 5.4 mm | 4.5 – 8 |
| Shank diameter at end | 4.6 mm | 3.5 – 6 |
| Socket opening diameter | 3.2 mm | 2.6 – 3.6 |
| Ball diameter | 4 mm | 3 – 5 |
| Ball clearance | 0.1 mm | 0 – 0.3 |
| Collar diameter | 3.6 mm | 3 – 5 |
| Thread diameter (M2) | 2 mm | 1.6 – 3 |
| Stud length from ball center | 11.5 mm | 9 – 20 |
| Nut across flats | 4 mm | 3 – 6 |
| Nut thickness | 1.6 mm | 1 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.