Brackets and mounts
Miniature Electric Arc Furnace
- Bounding box
- 140 × 145 × 168 mm
- Engine
- 3D Printing B-rep
- Parameters
- 27
- Published
- November 14, 2026
Download
Free to download and use. See the terms.
The prompt
Create a complete miniature electric arc furnace model on a flat rectangular base plate measuring 140 mm by 140 mm and 8 mm thick. On top of the base plate, place two vertical side support stands 90 mm high spaced 110 mm apart holding a central cylindrical furnace shell. The cylindrical furnace body has an outer diameter of 100 mm, total height of 110 mm, a flat bottom elevated 20 mm above the base plate, and a protruding pouring spout on the front upper rim extending 25 mm outward. On top of the cylinder, add a slightly domed lid 104 mm in diameter and 15 mm thick with three symmetrical vertical holes of 11 mm diameter arranged in a triangle pattern near the center. Add a side mast column 160 mm high mounted to the rear of the base plate with a horizontal cantilever arm extending over the top lid.
Parameters
| Name | Value | Range |
|---|---|---|
| Base plate side | 140 mm | 80 – 220 |
| Base plate thickness | 8 mm | 4 – 20 |
| Base plate corner radius | 4 mm | 0 – 15 |
| Shell outer diameter | 100 mm | 50 – 180 |
| Shell height | 110 mm | 50 – 220 |
| Shell wall thickness | 4 mm | 2 – 12 |
| Shell floor thickness | 8 mm | 3 – 20 |
| Shell bottom above base plate | 20 mm | 5 – 60 |
| Spout outward length | 25 mm | 8 – 50 |
| Spout half angle | 15 deg | 8 – 35 |
| Spout lip drop | 7 mm | 2 – 20 |
| Spout height at shell | 12 mm | 5 – 25 |
| Lid diameter | 104 mm | 70 – 200 |
| Lid thickness | 15 mm | 6 – 40 |
| Lid dome rise | 5 mm | 0 – 12 |
| Lid hole diameter | 11 mm | 4 – 20 |
| Lid hole circle diameter | 44 mm | 20 – 80 |
| Stand height above plate | 90 mm | 40 – 160 |
| Stand centre spacing | 110 mm | 60 – 180 |
| Stand thickness | 16 mm | 6 – 30 |
| Stand depth | 60 mm | 20 – 120 |
| Mast height above plate | 160 mm | 80 – 260 |
| Mast column diameter | 16 mm | 8 – 40 |
| Arm length from mast axis | 100 mm | 40 – 200 |
| Arm width | 16 mm | 6 – 40 |
| Arm thickness | 10 mm | 4 – 30 |
| Arm clearance above lid | 4 mm | 1 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and