Mechanical parts
Mini Full-Suspension MTB - Exploded Parts
- Bounding box
- 447 × 35 × 35.7 mm
- Engine
- 3D Printing B-rep
- Parameters
- 32
- Published
- November 11, 2026
Download
Free to download and use. See the terms.
The prompt
make me a full suspension mtb (that the suspensions can be pressed down) an do not make one all the parts combined together, put them on the floor and the spring is 5 mm long and 2mm wide so it needs to be a mini one
Parameters
| Name | Value | Range |
|---|---|---|
| Gap between exploded parts | 8 mm | 2 – 30 |
| Frame length | 80 mm | 50 – 150 |
| Frame height | 40 mm | 25 – 80 |
| Bottom bracket width | 20 mm | 10 – 40 |
| Main tube diameter | 6.5 mm | 3 – 12 |
| Swingarm length | 60 mm | 40 – 100 |
| Swingarm width | 25 mm | 14 – 50 |
| Swingarm thickness | 12 mm | 6 – 24 |
| Shock body length | 18 mm | 10 – 40 |
| Shock body diameter | 5 mm | 3 – 12 |
| Spring free length | 5 mm | 3 – 20 |
| Spring outside diameter | 2 mm | 1.5 – 8 |
| Spring wire diameter | 0.4 mm | 0.3 – 1 |
| Crown + steerer height | 30 mm | 18 – 60 |
| Steerer tube diameter | 5 mm | 3 – 10 |
| Upper fork leg diameter | 5 mm | 3 – 10 |
| Fork leg spacing | 14 mm | 8 – 28 |
| Lower slider length | 35 mm | 20 – 70 |
| Lower slider diameter | 6.5 mm | 4 – 12 |
| Wheel outside diameter | 30 mm | 18 – 70 |
| Tire width | 6 mm | 3 – 14 |
| Axle / hub hole diameter | 4 mm | 2 – 8 |
| Handlebar width | 35 mm | 20 – 80 |
| Handlebar tube diameter | 5 mm | 3 – 12 |
| Stem length | 12 mm | 6 – 30 |
| Saddle length | 20 mm | 12 – 40 |
| Saddle width | 10 mm | 6 – 25 |
| Seatpost length | 25 mm | 12 – 50 |
| Seatpost diameter | 4 mm | 2.5 – 10 |
| Crank axle width | 20 mm | 12 – 50 |
| Pedal length | 10 mm | 5 – 20 |
| Pedal width | 5 mm | 3 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.