Jigs and fixtures
Mini Desk Sweeper
- Bounding box
- 149.0 × 115.0 × 66.3 mm
- Engine
- Precision B-rep
- Parameters
- 39
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
xCreate a detailed 3D model of a compact desktop cleaner (mini desk sweeper). Design requirements: - A rectangular, slightly rounded main body. - A wide rotating cylindrical brush underneath the front. - Two small wheels on either side. - A removable dust collection tray at the back. - A small ergonomic handle on top. - A front opening where dust, pencil shavings and eraser crumbs can enter. - A modern, futuristic appearance. - Smooth rounded edges and realistic proportions. Make the model practical, with separate visible components for the wheels, brush, body and dust tray. Dimensions: - Length: 140 mm - Width: 95 mm - Height: 65 mm Keep the design compact enough to fit on a school desk. Make it look like a professionally designed miniature cleaning machine. Ensure the parts are structurally printable and avoid unnecessary tiny details.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Length | 140 mm | 100 – 200 |
| Body Width | 95 mm | 60 – 140 |
| Body Height | 33 mm | 20 – 60 |
| Corner Radius | 8 mm | 2 – 20 |
| Top Edge Fillet | 4 mm | 0.5 – 8 |
| Body Underside Height | 14 mm | 4 – 30 |
| Front Intake Width | 84 mm | 20 – 90 |
| Front Intake Height | 13 mm | 4 – 25 |
| Front Intake Depth | 41 mm | 10 – 60 |
| Rear Pocket Width | 80 mm | 20 – 90 |
| Rear Pocket Height | 27 mm | 10 – 40 |
| Rear Pocket Depth | 41 mm | 10 – 60 |
| Pocket Floor Rise | 1 mm | 0 – 8 |
| Brush Diameter | 22 mm | 10 – 40 |
| Brush Length | 80 mm | 30 – 120 |
| Bristle Ridges | 12 pcs | 4 – 24 |
| Ridge Height | 1.5 mm | 0.5 – 4 |
| Ridge Width | 2 mm | 0.8 – 6 |
| Brush Axle Diameter | 6 mm | 2 – 12 |
| Brush Position (X) | 44 mm | 10 – 60 |
| Wheel Diameter | 18 mm | 8 – 40 |
| Wheel Width | 8 mm | 3 – 20 |
| Tire Edge Radius | 2 mm | 0.5 – 4 |
| Wheel Position (X) | -45 mm | -60 – 10 |
| Hub Diameter | 8 mm | 2 – 16 |
| Tray Length | 45 mm | 20 – 70 |
| Tray Width | 79 mm | 20 – 90 |
| Tray Height | 26 mm | 8 – 40 |
| Tray Wall Thickness | 3 mm | 1.2 – 6 |
| Tray Corner Radius | 3 mm | 1 – 10 |
| Rear Protrusion | 5 mm | 0 – 20 |
| Pull Lip Width | 20 mm | 5 – 40 |
| Pull Lip Height | 7 mm | 3 – 15 |
| Pull Lip Depth | 4 mm | 1 – 15 |
| Handle Span | 60 mm | 20 – 110 |
| Handle Height | 18 mm | 8 – 40 |
| Handle Thickness | 10 mm | 4 – 25 |
| Handle Bar Section | 8 mm | 3 – 15 |
| Handle Grip Radius | 2.5 mm | 0.5 – 3.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
