Brackets and mounts
Microscope stand and 1W LED light bars
- Bounding box
- 320 × 200 × 312 mm
- Engine
- 3D Printing B-rep
- Parameters
- 17
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
Fully 3D-printed stand for the S20 Ultra soldering microscope, with light wedges reworked for bare 1W LED chips mounted on a 19-20 mm aluminium or copper-clad strip, deep channel, air gap behind and a printed white diffuser.
Parameters
| Name | Value | Range |
|---|---|---|
| Base width | 200 mm | 150 – 220 |
| Base depth | 200 mm | 150 – 220 |
| Base thickness | 8 mm | 5 – 15 |
| Post square size | 32 mm | 24 – 40 |
| Post wall | 4 mm | 2.4 – 6 |
| Each post section height | 150 mm | 100 – 200 |
| Joint tongue length | 20 mm | 10 – 30 |
| Arm reach, sleeve face to bolt | 70 mm | 40 – 120 |
| Arm width | 36 mm | 24 – 50 |
| Arm thickness | 16 mm | 10 – 24 |
| Carriage sleeve height | 50 mm | 35 – 80 |
| Carriage sleeve wall | 8 mm | 6 – 12 |
| Carriage position in assembly | 230 mm | 40 – 260 |
| Light wedge height | 60 mm | 40 – 90 |
| Light wedge length | 140 mm | 80 – 200 |
| LED bar slot width, fits 19-20 mm strip | 20.5 mm | 8 – 30 |
| Channel depth below diffuser | 10 mm | 5 – 16 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and