Jigs and fixtures
MagSafe iPhone 17 Pro Stand (Vertical/Horizontal)
- Bounding box
- 158 × 80 × 120 mm
- Engine
- 3D Printing B-rep
- Parameters
- 13
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
create a phone stand that allows for a iphone 17 pro with a mag safe charger built in to beable to hold it both horizantaly or vertically
Parameters
| Name | Value | Range |
|---|---|---|
| iPhone width | 72 mm | 50 – 120 |
| iPhone height | 150 mm | 120 – 220 |
| iPhone thickness | 8.5 mm | 6 – 15 |
| MagSafe charger diameter | 56 mm | 50 – 65 |
| MagSafe charger thickness | 5 mm | 3 – 8 |
| Pocket clearance per side | 0.25 mm | 0.1 – 0.5 |
| Cable exit hole diameter | 8 mm | 4 – 12 |
| Charger centre height from phone bottom (fraction) | 0.48 mm | 0.35 – 0.6 |
| Phone tilt from vertical | 18 deg | 10 – 35 |
| Bottom lip height | 10 mm | 5 – 25 |
| Desired back height | 120 mm | 70 – 170 |
| Desired base depth | 80 mm | 55 – 140 |
| Extra stand width over phone height | 8 mm | 0 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →M5 Hex Bolt and Nut Assembly
Create a precise, editable, parametric mechanical CAD assembly based on the provided engineering drawing reference. UNIT SYSTEM: Use millimeters (mm). Model all dimensions exactl
Six-Canister Film Tray
Create a tray for six 35 mm film canisters with transport handles
Washbasin Stand
Create a welded stainless-steel washbasin stand made from rectangular hollow sections 40 × 60 × 3 mm. The stand consists of two parallel vertical rectangular side frames facing ea
Linear Tray
// Linear tray 200x75x15 mm. Print flat, no supports. $fn=64; N=10; e=0.01; L=200; W=75; R=12; bt=5; wt=5; H=15; ri=R-wt; rt=2.4; ff=1; ch=0.6; module rr(l,w,r) offset(r=r) square
Skew Planar Antenna Bending Jig
Create a jig for the skew planar antenna 4 lobs banding at 43 angle.
Go-Kart Steering Rack Assembly
simple ultra compact lightwweight cheap steering rack for a go kart vehicue
