Mechanical parts
M2 Flat Head Torx Screw
- Bounding box
- 3.8 × 3.8 × 5.7 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
Create a M2 screw with 0.4 thread pitch, 4.5mm screw length and with flat head and a Torx 6 pocket on head
Parameters
| Name | Value | Range |
|---|---|---|
| Thread Diameter (M) | 2 mm | 1 – 6 |
| Thread Pitch | 0.4 mm | 0.2 – 1.5 |
| Length Under Head | 4.5 mm | 2 – 30 |
| Tip Chamfer Length | 0.3 mm | 0 – 1 |
| Head Diameter | 3.8 mm | 2.5 – 12 |
| Head Height | 1.2 mm | 0.5 – 6 |
| Countersink Angle | 90 deg | 60 – 120 |
| Torx Size (across lobes) | 1.75 mm | 0.8 – 6 |
| Torx Pocket Depth | 0.6 mm | 0.2 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.