Mechanical parts
M14 Wing Nut DIN 315
- Bounding box
- 52.3 × 26.0 × 30.8 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- October 19, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D model of an M14 wing nut (DIN 315 compliant). It consists of a cylindrical central body with a height of 10 mm and an outer diameter of 26 mm. The body has a central threaded hole with a 14 mm diameter and a 2.0 mm pitch. On opposite sides of the central body, attach two symmetrical curved wings that flare outwards and upwards. Each wing extends to a total width of 52.7 mm across both wings and reaches a total height of 30.8 mm. The wings should have smooth rounded top corners and a comfortable ergonomic shape for manual tightening
Parameters
| Name | Value | Range |
|---|---|---|
| Body Diameter | 26 mm | 10 – 60 |
| Body Height | 10 mm | 2 – 30 |
| Central Hole Diameter | 14 mm | 2 – 50 |
| Total Width Across Wings | 52.7 mm | 30 – 100 |
| Total Height | 30.8 mm | 15 – 80 |
| Wing Thickness | 10 mm | 2 – 20 |
| Top Corner Fillet Radius | 2 mm | 0 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Plastic Bottle with Screw Cap
A plastic bottle with a twist-on screw cap. Adjustable bottle diameter, height, and cap height.
Copper Cold-Plate Base with Fin Channels and Face-Seal Groove
1. Copper Base Create a rectangular copper base 84 × 84 mm. Use C110 ETP copper. Finished overall base thickness is 5.70 mm. The bottom floor thickness below the channels is 2.50 m
Spring Cup
"Create a cylindrical spring cup. The main body has an outer diameter of 14 mm and a total height of 5 mm. Cut a centered recessed pocket into the top face that is 8.5 mm in diamet
M6 Thumb Screw
Create ONLY a mechanical thumb screw. This is NOT a knob. Create a real M6 thumb screw used in industrial machinery. Features: • Circular head 22 mm diameter • Head height 12 m
Engine Piston
make me a cylinder/piston for an engine. The bottom hole to connect to the cranckshaft needs to be 24 mm in diameter
Nuclear Medicine Center Functional Floor Plan (Parametric Wall Model)
Create a **2D architectural floor plan in DWG format** for a new **Nuclear Medicine Center**. This is a **generic conceptual functional layout**, NOT a construction-ready project.